SPS for PC
SPS for Industry
 
SINGLE 2U
SINGLE 1U
REDUNDANT 1U+1
REDUNDANT 1U
REDUNDANT PS2 1+1
REDUNDANT UN+1
REDUNDANT 2U3+1
REDUNDANT 3U2+1
REDUNDANT 4U3+1
Adaptor
Power System for telecom
DC-DC Converter
External Box
PC Case
Projector
 
PSF220M
  Dimension: 220*100*40.5 mm
Watt: 350
Wight: 1.6KG
Safety & Optional
 
   
 

Applications
  PC Case,  

Features
 
Electrical spec' Complies with SFX12V
Energy Star / Green power
Fan control
With 6CM Cooling fan
Dimension: 100(L) X 125(W) X 63.5(H) mm max.
 

Specifications
 
Display Technology 3×0.7" polysilicon LCD
  Native Resolution XGA
  Support Resolution VGA to SXGA
  Video Compatibility NTSC / PAL / SECAM
  Brightness 2000ANSI-LM
  Contrast Ratio 450:1
  H-Synch Range 15~80 KHz
  V-Synch Range 43~85 Hz
  Projections Lens Manual Zoom & Focus , F=1.7~2.1, f=26~32mm
  Zoom Ratio 1.23
  Throw Ratio 60”(Wide) ~48”(Tele)@2m
  Projection Distance 1.33m(40")~6.67m(200")
  Aspect Ratio 4:3 Native / 16:9 Compatible
  Projection Methods Front/Rear/Ceiling/Rear Ceiling
  Audio 1 × 2 watts Speaker Output
  Lamp 180W , 2000hrs lamp life
  Power Consumption 250W
  Audio Noise <37dB

I/O Connector Video: Composite Video × 1
S-Video: Mini DIN 4 pin × 1
RGB-IN: Analog-D-sub 15 pin x 1
DVI data connector x 1
Audio: Mini Jack × 1
USB IR Control Connector × 1
RS232 Connector × 1

Accessory User´s Guide
Batteries × 2
Remote Controller
Power Cord
Video Cable (RCA Type)
S-Video Cable
VGA Cable
Audio Cable(PC to PC)
Audio Cable(RCA to PC)
USB Cable
DVI Cable
HDTV Cable
Carry bag(option)


Input
Input range: 115/230Vac switch-able. Frequency: 50/60Hz.
Efficiency: >68% at full load, nominal line.

Output
Hold up time: >16ms at full load, nominal line.
Rise time: <100ms at full load, nominal line.
Over voltage protection: +3.3V, +5V, +12V.
Over power protection
Short circuit Protection
Power good signal: TTL compatible.

Output Voltage Regulation Min .Load Max .Load Ripple
V1 +5V ±5% 0.3A 13A 50mV
V1 +5V ±5% 0.3A 13A 50mV
V1 +5V ±5% 0.3A 13A 50mV
V1 +5V ±5% 0.3A 13A 50mV
*Max continuous combined load on +3.3V and +5V output shall not exceed 80W